For more info, contact us:
phone: +1 (604) 849-0653

Complete System

Price: $32,750 CAD 
 
Overview
Specs

The Sea To Sky CamComplete, includes everything you need to achieve  lightweight, ultra stable flying camera angles in even the most complex of environments. Designed for commercial applications, live events, television and documentary work, the Sea to Sky Cam is a point to point system that travels a near straight line in both horizontal and vertical applications. Spanning distances up to 300 meters and traveling from a crawl to 70 km/hr, the system provides unlimited dolly angles in locations that would be impossible any other way. The Sea to Sky Cam offers incredible production value that will put your projects leaps and bounds above your competitors.

Designed

  • Extremely Light 4 pelican cases and 2 bags means only one car to transport it and only a few people to carry it, even into the most inaccessible locations.
  • Affordable less overhead means more use of this high production value tool.
  • Fast making it possible to set up the same day of your film shoot.
  • Any Slope from climbing vertically at walking speed to a 300 meter horizontal run with speeds exceeding 70 km/hr.
  • Any Location high powered batteries allow for all day operation without the need for a generator or on the grid power.

Includes

  • Trolley (with horizon level)
  • Motor system and winches (not shown)
  • Wireless camera head
  • RF SD Video Transmission
  • Marshall 7″ HD monitor with tripod and RF receiver and antenna.
  • 4 professional 14.4 volt batteries and dual charger
  • Crawl and Vertical Add On.
  • 3000 feet / 900 meters of tech rope (for a total span of 750 feet / 230 meters)
  • 4 Pelican cases, one tool bag and one 26 gallon / 120 litre, rope bag
  • Does not include camera

How it works…

The Sea to Sky Cam is referred to as a one-dimensional rig, other names include; A to B, single axis or point-to-point system. A trolley carrying the camera zooms along two support lines on a horizontal, sloped or vertical plane while being pulled by a single winch located at one of the two anchor points. This winch drives a third rope that acts like a “clothes line,” as a continuous loop of rope that connects to either side of the trolley. Transmission of video, audio and control of the camera is through radio frequency, enabling faster speeds and a smaller and more portable system than using fiber optic cables. Power requirement for the winch and trolley control, located at one of the anchor points, is by high amperage batteries. At live events these batteries require 115V AC power. Support and drive lines are made of our custom Cable Cam Tech Line (light-weight high strength rope) and are adjusted quickly and easily even during filming by quick adjust winches connected to the motor frame located at one of the anchor points.

SPEED  Crawl  to  70 km/hr  45 m/hr
TORQUE  10 degrees  at  50 km/hr  30 m/hr
   30 degrees  at  25 km/hr  15 m/hr
 90 degrees  at  5 km/hr  3 m/hr
POWER  Motor  AC  DC Battery  Hours
 Monitor  yes  yes  6
 Video TX  no  yes  8
 Video RX  yes  yes  8
 Camera Head  no  yes  8
 Camera  no  yes  8
TECH LINE  Size  6mm  0.25 inches
 Drive Line  450 meters  1500 feet (loop)

 Support Line 1  230 meters  750 feet

 Support Line 2  230 meters  750 feet
 Breaking Strength  2700 kg  6000 pounds
TROLLEY  Without camera  12 kg  26.75 pounds
ANCHOR LOAD  Average  295 kg  650 pounds
SHIPPING  Pelican 1600 case  54.4×41.9x20cm  21.43×16.5×7.87″
 22 kg  50 pounds
 Pelican 1600 case  54.4×41.9x20cm  21.43×16.5×7.87″
 22 kg  50 pounds
 Pelican 1550 case  46.8×35.5×19.3cm  18.43x14x7.62″

 22 kg  50 pounds
 Pelican 1550 case  46.8×35.5×19.3cm  18.43x14x7.62″
 22 kg  50 pounds
 Trolley, Motor Frame  1.2×0.6×0.3 meter  4x2x1 feet
 31.75 kg  70 pounds
 Rope Bag  120 litres  26 gallons
 31.75 kg  70 pounds
 Tool Bag  10 litres  2 gallons
 11 kg  25 pounds

 

All information subject to change at any time, please call for up to date specs and costs.

 

© 2010 Sea to Sky Cable Cam   |   Web Developement by Evoke Media